1. P. Maas, Y. Mizumoto, Y. Kakinuma, S Min, "Machinability Study of Single-Crystal Sapphire in a Ball-End Milling Process", INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, Vol.18, No.1, (2017), pp.109-114 (IF=1.075)

2. Y. Mizumoto, H. Kangawa, H. Itobe, T. Tanabe, Y. Kakinuma, "Influence of crystal anisotropy on subsurface damage in ultra-precision cylindrical turning of CaF2", Precision Engineering, Vol.49, (2017), pp.104-114 (IF=2.235)

3. Y. Mizumoto, P. Maas, Y. Kakinuma, S. Mi, "Investigation of the cutting mechanisms and the anisotropic ductility of monocrystalline sapphire", CIRP Annals, Vol.66, No.1, (2017), pp.89-92 (IF=2.542)

4. Y. Yamada, Y. Kakinuma, "Sensorless cutting force estimation for full-closed controlled ball-screw-driven stage", International Journal of Advanced Manufacturing Technology, Vol.87, No.9, (2017), pp.3337-3348 (IF=1.458)

5. Y. Yamada, T. Kadota, S. Sakata, J. Tachibana, K. Nakanishi, M. Sawada, Y. Kakinuma, "Integrated Chatter Monitoring based on Sensorless Cutting Force/Torque Estimation in Parallel Turning", International Journal of Automation Technology, Vol.11, No.2, (2017), pp.215-225 (IF=N/A)

6. Y. Yamada, S. Yamato, Y. Kakinuma, "Mode decoupled and sensorless cutting force monitoring based on multi-encoder", International Journal of Advanced Manufacturing Technology, Vol.92, No.9-12, (2017) pp.4081-4093 (IF=2.209)

7. Y. Oba, Y. Kakinuma, "Simultaneous tool posture and polishing force control of unknown curved surface using serial-parallel mechanism polishing machine", Precision Engineering, Vol.49, (2017), pp.24-32 (IF=1.922)

8. Y. Mizumoto, H. Amano, H. Kangawa, K. Harano, H. Sumiya, Y. Kakinuma, "On the improvement of subsurface quality of CaF2 single crystal machined by boron-doped nano-polycrystalline diamond Tools", Precision Engineering (in press)

9. S. Yamato, T. Hirano, Y. Yamada, R. Koike, Y. Kakinuma, "Sensor-less on-line chatter detection in turning process based on phase monitoring using power factor theory", Precision Engineering (in press)

1. Y. Oba, Y. Yamada, K. Igarashi, S. Katsura, Y. Kakinuma, "Replication of skilled polishing technique with serial-parallel mechanism polishing machine", Precision Engineering, Vol.45, (2016), pp.292-300 (IF=1.922)

2. S. Yamada, R. Koike, S. Arano, Y. Kakinuma, T. Aoyama, "Basic Study on Electro-Adhesive Surface Applying 3-Dimensional Micro Structures", International Journal of Automation Technology, Vol.10, No.1, (2016), pp.48-54

3. Y. Kakinuma, M. Mori, Y. Oda, T. Mori, M. Kashihara, A. Hansel, M. Fujishima, "Influence of metal powder characteristics on product quality with directed energy deposition of Inconel 625", CIRP Annals, Vol.65, No.1, (2016), pp.209-212

4. R. Koike, K. Ohnishi, T. Aoyama, "A sensorless approach for tool fracture detection in milling by integrating multi-axial servo information", CIRP Annals, Vol.65, No.1, (2016), pp.385-388 (IF=2.542)

5. T. Ishida, R. Koike, T. Aoyama, Y. Kakinuma, "Estimation of cutting temperature in high-feed-speed machining of carbon fiber-reinforced thermoplastics", International Journal of Automation Technology, Vol.10, No.3, (2016), pp.341-347

6. Y. Nakagawa, Y. Mizumoto, T. Kato, T. Kobatake, H. Itobe, Y. Kakinuma, T. Tanabe, "Dispersion tailoring of a crystalline whispering galley mode microcavity for a wide-spanning optical Kerr frequency comb", Journal of the Optical Society of America B, Vol.33, No.9, (2016), pp.1913-1920 (IF=1.731)

7. H. Itobe, Y. Nakagawa, Y. Mizumoto, H. Kangawa, Y. Kakinuma, T. Tanabe, "Bi-material crystalline whispering gallery mode microcavity structure for thermo-opto-mechanical stabilization", AIP Advances, Vol.6, No.5, (2016), p.055116 (IF=1.444)

2015年

1. S. Azami, H. Kudo, Y. Mizumoto, T. Tanabe, J. Yan, Y. Kakinuma, "Experimental Study of Crystal Anisotropy on Ultra-precision Cylindrical Turning of Single-crystal Calcium Fluoride", Precision Engineering, Vol.40 (2015), pp.172-181

2. K. Noma, Y. Kakinuma, T. Aoyama, S. Hamada, "Ultrasonic Vibration-assisted Machining of Chemically Strengthened Glass with Workpiece Bending", Journal of Advanced Mechanical Design, System, and Manufacturing, Vol.9, No.2, (2015), p.JAMDSM0016

3. Y. Kakinuma, S. Azami, T. Tanabe, "Evaluation of Subsurface Damage Caused by Ultra-precision Turning in Fabrication of CaF2 Optical Micro Resonator", CIRP Annals, Vol.64, No.1, (2015) pp.117-120 (IF=2.542)

1. Y. Kakinuma, K. Enomoto, T. Hirano, K. Ohnishi, "Active Chatter Suppression in Turning by Band-Limited Force Control", CIRP Annals, Vol. 63, No.1 (2014) (IF=2.251)

2. R. Koike, Y. Kakinuma, T. Aoyama, "Tool Fracture Detection by Integrating Disturbance Observer and Rotational Digital Filter", CIRP Journal of Manufacturing Science and Technology, Vol.7, No.3 (2014), pp.177-184

3. S. Toenissen, R. Koike, Y. Kakinuma, T. Aoyama, F. Klocke, "Monitoring of tool collision in drilling by disturbance observer", CIRP Journal of Manufacturing Science and Technology, Vol.7, No.3, (2014), pp.274-282

4. R. Koike, R. Kumakura, T. Arai, E. Uchishiba, M. Murakami, T. Sagara, Y. Kakinuma, "Sensorless Tool Stiffness Monitoring in Buffing", International Journal of Automation Technology, Vol.8, No.6 (2014), pp.827-836

1. Y. Kakinuma, K. Igarashi, S. Katsura, T. Aoyama, "Development of 5-axis polishing machine capable of simultaneous trajectory, posture, and force control", CIRP Annals, Vol.62, No.1 (2013), pp.379-382 (IF=2.251)

2. K. Koyanagi, Y. Takata, Y. Kakinuma, H. Anzai, K. Sakurai, T. Motoyoshi, and T. Oshima, "Temperature and shear rate characteristics of electrorheological gel applied to a clutch", Journal of Physics: Conference Series, 412, (2013), p.012013

1. Y. Kakinuma, S. Kidani, T. Aoyama, "Ultra-precision cryogenic machining of viscoelastic polymers", CIRP Annals, Vol. 61, No.1 (2012), pp.79-82 (IF=1.708)

2. M. Ichiyanagi, I. Tsutsui, Y. Kakinuma, Y. Sato, K. Hishida, "Three-dimensional measurement of gas dissolution process in gas-liquid microchannel flow", International Journal of Heat and Mass Transfer, Vol.55, (2012), pp.2872-2878 (IF=2.407)

3. M. Ichiyanagi, K. Sakai, S. Kidani, Y. Kakinuma, Y. Sato, K. Hishida, "Evaluation methodology of gas permeable characterization in a polymer-based microfluidic device by confocal fluorescence imaging", Journal of Micromechanics and Microengineering, Vol.22, (2012), p.065023 (IF=2.105)

4. T. Kubo, Y. Kakinuma, "Basic Performance Evaluation of Electro-adhesive Film with Micro Mesh Sheet", Key Engineering Materials, Vol.516, (2012), pp.222-227

5. K. Enomoto, M. Takei, Y. Kakinuma, "Real-Time Cutting Force/Torque Prediction During Turning", International Journal of Automation Technology, Vol.6, No.5, (2012), pp.669-674

6. T. Kamigochi, Y. Kakinuma, "Development of an intelligent stage with sensor-less cutting force and torque monitoring function", International Journal of Automation Technology, Vol.6, No.6, (2012), pp.736-741

7. R. Koike, Y. Kakinuma, T.Aoyama, "Sensor-less Tool Fracture Detection Applying Disturbance Observer Theory", Key Engineering Materials, Vol.523-524, (2012), pp.439-444

1. M. Takei, D. Kurihara, S. Katsura, Y. Kakinuma, "Hybrid Control for Machine Tool Table Applying Sensor-less Cutting Force Monitoring", International Journal of Automation Technology, Vol.5, No.4, (2011), pp.587-593

2. Y. Kakinuma, Y. Sudo, T. Aoyama, "Detection of Chatter Vibration in End Milling applying Disturbance Observer", CIRP Annals-Manufacturing Technology, Vol.60, No.1, (2011), pp.109-112 (IF=1.684)

3. K. Igarashi, M. Sato, Y. Kakinuma, "Buffing Performance Analysis of Viscoelastic Polymer with Sensor-less Polishing Pressure Control", Advanced Materials Research, Vol.325, (2011), pp.482-488

4. K. Koyanagi, Y. Kakinuma, H.Anzai, K. Sakurai, T. Oshima, "Stabilizing Output of an Electrorheological Gel Linear Actuator", Journal of Intelligent Material Systems and Structures, Vol.22, No.15, (2011), pp.1685-1692 (IF=1.604)

5. Y. Shida, Y.Kakinuma, T. Aoyama, H. Minami, H. Anzai, "Basic Performance Evaluation of ER gel in vacuum Condition", Journal of Intelligent Material Systems and Structures, Vol.22, No.15, (2011), pp.1699-1706 (IF=1.604)

6. Y. Urakami, T. Aoyama, H. Anzai, Y. Kakinuma, "Development of Tactile Display Device using ERG Multiple-Disk Clutch", Journal of Intelligent Material Systems and Structures, Vol.22, No.15, (2011), pp.1693-1698 (IF=1.604)

1. T. Kubo, S. Ota, M. Oda, K. Hashishita, Y. Kakinuma, "Evaluation of Polished Surface for Viscoelastic Polymer", Advanced Materials Research, Vol.126-128, (2010), pp.493-498.

2. Y. Kakinuma, H. Tanaka, T. Aoyama, "Development of Multiple-disk Brake Element Using Electro-rheological Gel", International Journal of Applied Electromagnetics and Mechanics, Vol.33, No.3-4, (2010), pp.1677-1683

3. D. Kurihara, Y. Kakinuma, S. Katsura, "Cutting Force Control using Sensor-less Cutting force Monitoring Method", Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.5, No.4, (2010), pp.955-965 (IF=0.200)

4. K. Mishima, Y. Kakinuma, T. Aoyama, "Pre-Deformation-assisted Cryogenic Micromachining for Fabrication of Three-dimensional Unique Micro Channels", Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.5, No.4, (2010), pp.936-947 (IF=0.200)

5. Y. Kakinuma, T. Aoyama, H. Anzai, "Development of High-performance ER Gel based on the Principle of Electro-adhesive Effect", Journal of Intelligent Material Systems and Structures, Vol.21, (2010), pp.1501-1508 (IF=1.604)

6. K. Koyanagi, Y. Kakinuma, H. Anzai, T. Yamaguchi, "Electrorheological Gel Linear Actuator for Human-Coexistence Robots", Advanced Robotics, The International Journal of the Robotics Society of Japan, Vol.24, (2010), pp.1963-1981

7. S. Ikeda, Y. Kakinuma, "Basic Study on Nanofabrication of Biodegradable Plastics applying Biochemical Machining", Precision Engineering, Vol.35, No.3, (2010-7), pp.440-446 (IF=1.619)